Homeowners who have no significant knowledge of plumbing can have a headache trying to figure out how to fix their plumbing. You often have to wait for a plumber to make a house call, and you may end up paying a lot for a repair you could have made on your own. Read the following article and you’ll be able to take on any simple plumbing problem easily.
If the flapper is worn out, or if the seat for the flapper has mineral deposits building up, the water in the bowl is allowed to run constantly. Your water bill will show a significant increase at these times. The solution to this particular issue is flapper replacement in conjunction with cleaning the affected area.
Tightening a pipe too much is just as bad or even worse than not tightening it enough. The threads can break and might crack the pipe; you need to tighten pipes only enough to stop leaks.
Avoid dumping oil, fat, and grease in your drain. Grease hardens when it cools and will clog your pipes. Grease is of particular concern when there is a disposal unit installed in your drain. It can cause the unit to lose efficiency. Don’t put oils down the sink.
Check for floor damage around your toilet. If the floor around your toilet feels softer than the rest of the floor in your bathroom, there’s damage you need to address. Another great way to check is to actually sit on the toilet and move in a rocking motion, going back and forth from right to left to see how much give you feel. By noticing a problem early on, you can save yourself a bunch of money if you were to leave it alone.
To better the efficiency of the water heater, see what size a tank your household requires. Determining the correct tank size is a matter of estimating the water use by the people and appliances in your home.
To ensure a tight connection, purchase sealants which were manufactured specifically for your joints, whether they be copper, galvanized steel or threaded plastic. Plumbing stores or hardware stores will carry these products, plus they can offer any advice that you may need.
Cleaning an aerator can remove sediment buildup that causes low water pressure. To clean the aerator, you first want to disassemble the faucet and remove it. After that, remove the aerator and scrub it clean with a fine brush. You can use vinegar or some other type of cleaning solution to assist in the task. Wash it off, put it back together and connect the aerator to the faucet. Your water pressure should improve because the obstructing particles or buildup have been removed.
Make sure you do regular pipe cleanings with chemicals or tools to keep them from clogging up. This is highly important for pipes or toilet drains that are located outside where they can be influenced by tree roots.
Don’t use abrasive cleaners on fiberglass bathtubs or sinks; stick to laundry detergent or dish washing soap. Non-abrasive cleaners don’t contain the same harsh chemicals that drain cleaners do, so they are both effective and safe to pour down your pipes.
You can use two different methods to remove clean out plugs. The first way is to get a chisel and a hammer and try to jostle the fitting loose. If that doesn’t work, you’ll need to break through the plug itself.
It might seem that purchasing plumbing tools is rather costly, but consider how much money they can also save you. Follow free online videos to learn about a number of essential plumbing skills. Owning your own plumbing tools will prevent you from having to pay a professional plumber.
Check out any tiles that are loose to see if there is damage from a leak. Loose tiles might be an early indicator that there is a leak that needs to be taken care of, so press gently against the wall or floor where the tiles are to see if you feel any “give”. You can deal with a problem more easily if the tiles help you find the problem early on.
During cold, winter months, drain and disconnect your garden hoses. Failing to do this will damage the indoor water pipes that are connected to these hoses. However, it is safe for one to be hooked up in the garage, provided the temperature doesn’t dip below freezing.
If you have copper pipe, they might expand slightly as you run hot water through them. When they expand and contract over a period of time, they will not fit properly in their hangers and can grind and wear against them causing damage. To prevent this, put a thick layer of tape over the pipe and put it onto the hanger.
Even if you only have one choice, research your plumber before he arrives. Even if your insurance provider has assigned you someone of their choosing, find out who it is online and check do a web search for ratings of previous customers, so that you can be prepared for their arrival.
If, when you’re installing your new water heater, you notice that a pipe is extending from your draining pipe, make sure it’s reconnected. This pipe is probably for recirculation of the water and it works to keep energy usage to a minimum by making water heating more efficient.
As you can see, plumbing problems don’t have to be so difficult. If you can solve the problem yourself, you can save time waiting for a plumber, as well as saving a whole lot of money. Try applying what you’ve learned from this article next time you have a plumbing problem!